Centre boss: Difference between revisions
(link) |
No edit summary |
||
| Line 1: | Line 1: | ||
A '''centre-boss shield''' was a type of round or oblong [[shield]] common in [[period]]. It has called a centre-boss because of the single central grip, protected by a [[metal]] boss. Most centre-boss shields actually had a hole in the centre with the grip flush to the shield, with the protective boss projecting outward from the shield face itself. There is some speculation that some may have had a slight conical shape to the shield. |
[[image:shieldsround.jpg|right|200px|thumb|Replica centre boss shields. The one on the right is has a padded leather front.]]A '''centre-boss shield''' was a type of round or oblong [[shield]] common in [[period]]. It has called a centre-boss because of the single central [[grip]], protected by a [[metal]] boss. Most centre-boss shields actually had a hole in the centre with the [[grip]] flush to the shield, with the protective boss projecting outward from the shield face itself. There is some speculation that some may have had a slight conical shape to the shield. |
||
Historically these shields had metal [[boss]]es in the centre riveted to the [[wood]]en planked body which could be up to 95cm in diameter. Behind the shield is a wooden or metal crossbar to act as a handle. The face and back of the shield could be covered in [[leather]] stuffed with grass and [[paint]]ed. [[Housecarl]]s were specifically instructed not to use [[leather]] from [[sheep]] for this purpose. |
Historically these shields had [[metal]] or [[wood]]en [[boss]]es in the centre riveted to the [[wood]]en planked body which could be up to 95cm in diameter. Behind the shield is a wooden or metal crossbar to act as a [[handle]]. The face and back of the shield could be covered in [[leather]] stuffed with grass and [[paint]]ed. [[Housecarl]]s were specifically instructed not to use [[leather]] from [[sheep]] for this purpose. |
||
Centre-boss shields are handled very differently from other [[shield|shield types]] (such as the [[kite shield]] or the [[heater shield]]) which are strapped to the arm. Tending to be light-weight, a centre-boss shield can be "punched" towards an incoming blow. |
Centre-boss shields are handled very differently from other [[shield|shield types]] (such as the [[kite shield]] or the [[heater shield]]) which are strapped to the arm. Tending to be light-weight, a centre-boss shield can be "punched" towards an incoming blow. |
||
Centre-boss shields were commonly used by the [[Anglo-Saxon]]s and [[Norse]], but were known across the [[medieval]] world. |
Centre-boss shields were commonly used by the [[Anglo-Saxon]]s and [[Norse]], but were known across the [[medieval]] world. |
||
Revision as of 17:28, 24 March 2006
A centre-boss shield was a type of round or oblong shield common in period. It has called a centre-boss because of the single central grip, protected by a metal boss. Most centre-boss shields actually had a hole in the centre with the grip flush to the shield, with the protective boss projecting outward from the shield face itself. There is some speculation that some may have had a slight conical shape to the shield.
Historically these shields had metal or wooden bosses in the centre riveted to the wooden planked body which could be up to 95cm in diameter. Behind the shield is a wooden or metal crossbar to act as a handle. The face and back of the shield could be covered in leather stuffed with grass and painted. Housecarls were specifically instructed not to use leather from sheep for this purpose.
Centre-boss shields are handled very differently from other shield types (such as the kite shield or the heater shield) which are strapped to the arm. Tending to be light-weight, a centre-boss shield can be "punched" towards an incoming blow.
Centre-boss shields were commonly used by the Anglo-Saxons and Norse, but were known across the medieval world.
