Difference between revisions of "Weaving"

From Cunnan
Jump to navigationJump to search
m
Line 15: Line 15:
 
The warp threads generally form the stengthening shape for the cloth/braid, while the weft thread basically holds them into the shape they are held into while on the loom - so that once the cloth is removed from the loom, it retains its shape.
 
The warp threads generally form the stengthening shape for the cloth/braid, while the weft thread basically holds them into the shape they are held into while on the loom - so that once the cloth is removed from the loom, it retains its shape.
   
In [[period]], early [[wheel-spun]] techniques for [[spinning]] thread made a softer, less strong type of thread than the traditional [[whorl-spun]] thread. The wheel-spun threads were actually illegal to use in the weft-thread as they were considered too weak - especially where the cloth/braid was to carry weight. Whorl-spun thread was thus used for quite a long time after [[spinning wheels]] were invented and put to use.
+
In [[period]], early [[wheel-spun]] techniques for [[spinning]] thread made a softer, less strong type of thread than the traditional [[whorl-spun]] thread. The wheel-spun threads were actually illegal to use in the warp-thread as they were considered too weak - especially where the cloth/braid was to carry weight. Whorl-spun thread was thus used for quite a long time after [[spinning wheels]] were invented and put to use.

Revision as of 21:47, 31 July 2003

Weaving is taking separate threads and combining them to make fabrics or braid (woven or knotted cords).

There are several types of weaving:

In short, any technique that takes threads and entangles them in a more-or-less orderly fashion so that you end up with a solid piece of fabric or braid.

In the most common form, weaving is performed on a loom which holds several threads in place (called the warp threads) while the weaver passes another thread back-and-forth, lacing these threads in place (this other thread being called the weft thread).

The warp threads generally form the stengthening shape for the cloth/braid, while the weft thread basically holds them into the shape they are held into while on the loom - so that once the cloth is removed from the loom, it retains its shape.

In period, early wheel-spun techniques for spinning thread made a softer, less strong type of thread than the traditional whorl-spun thread. The wheel-spun threads were actually illegal to use in the warp-thread as they were considered too weak - especially where the cloth/braid was to carry weight. Whorl-spun thread was thus used for quite a long time after spinning wheels were invented and put to use.