Maille: Difference between revisions

From Cunnan
Jump to navigationJump to search
(link)
Line 3: Line 3:
== Manufacture ==
== Manufacture ==


In [[Europe]], the 1-to-4 pattern was completely dominant. In [[East Asia]] (primarily [[Japan]]), mail was also common, but here several more patterns were utilized and an entire nomenclature developed around them. In the [[Middle East]] and [[India]], yet other patterns were developed (but 1-to-4 being the most common) and often combined with metal plates linked in with the rings.
In [[Europe]], the 4-in-1 pattern was completely dominant. In [[East Asia]] (primarily [[Japan]]), mail was also common, but here several more patterns were utilized and an entire nomenclature developed around them. In the [[Middle East]] and [[India]], yet other patterns were developed (but 4-in-1 being the most common) and often combined with metal plates linked in with the rings.

Some late period [[plate armour]] incorporated 6-in-1 in small patches to cover vulnerable joints at the elbow, armpit and knee. Laced to the [[gambeson]], the dense, heavy 6-in-1 pattern provided excellent protection from piercing weapons, but was far too heavy for use in an entire [[hauberk]], using twice as much [[metal]] to cover the same area as the traditional 4-in-1 pattern.


Historically, the rings composing mail [[armour]] would be riveted, welded shut or constructed of punched rings, to reduce the chance of the rings splitting open when subjected to a thrusting attack or a hit by an [[arrow]]. Also structural integrity of the garment could be held without a heavier gauge of wire, when compared to butted mail.
Historically, the rings composing mail [[armour]] would be riveted, welded shut or constructed of punched rings, to reduce the chance of the rings splitting open when subjected to a thrusting attack or a hit by an [[arrow]]. Also structural integrity of the garment could be held without a heavier gauge of wire, when compared to butted mail.

Revision as of 15:12, 13 April 2006

Maille is the period-correct French term for what has commonly been called "chainmail" since Victorian times and now modernly in Dungeons and Dragons. 'Mail' or 'mayle' are the equivalent English terms. Maille is made of many interlocking metal rings, and one of the most common forms of armour was the maille hauberk.

Manufacture

In Europe, the 4-in-1 pattern was completely dominant. In East Asia (primarily Japan), mail was also common, but here several more patterns were utilized and an entire nomenclature developed around them. In the Middle East and India, yet other patterns were developed (but 4-in-1 being the most common) and often combined with metal plates linked in with the rings.

Some late period plate armour incorporated 6-in-1 in small patches to cover vulnerable joints at the elbow, armpit and knee. Laced to the gambeson, the dense, heavy 6-in-1 pattern provided excellent protection from piercing weapons, but was far too heavy for use in an entire hauberk, using twice as much metal to cover the same area as the traditional 4-in-1 pattern.

Historically, the rings composing mail armour would be riveted, welded shut or constructed of punched rings, to reduce the chance of the rings splitting open when subjected to a thrusting attack or a hit by an arrow. Also structural integrity of the garment could be held without a heavier gauge of wire, when compared to butted mail.

In modern re-enactment and live-action roleplaying games, split sprung steel washers are sometimes used. Usually a two pairs of pliers are used to bend the washers open and closed whilst "knitting" the chainmail. The resulting mail is usually heavier than traditional wire-wound mail, which is also used by reenactment groups.

Members of the New Varangian Guard and other Australian reenactment groups sometimes make their maille from spring steel rings. By using spring steel, you can use a finer gauge of wire and still retain strength. However, for truly tough and light maille, you cannot go past riveted maille. Another option, if you have the money, is always titanium - strong, light and if you ask some nicely they might anodize it for you. It is not, however, historically correct.

In the SCA, you will find people whose skill at making historically accurate mail varies right across the spectrum; from amateur to true artisan.

Physical Form

Size

Historically mail was smaller than most mail currently used by recreationist societies. Extent Viking Age mail was made from approximately 1.2 mm diameter wire with an internal diameter of 5.5 to 6 mm. Later period hauberks and voiders followed the same size.

Modern experiments with a mail byrnie made to similar dimensions to historical examples have revealed that is it possible to not only swim in mail, but also to float.

Construction

Extent byrnies have been tested and demonstrated to be made of alternatively riveted and punched mail. Later mail was entirely riveted.

Viking age mail links frequently have a round or oval section, although some solid rings have a profile that is almost square.

External Link

Swimming in Viking Age Mail