Difference between revisions of "Imitation Gemstones"

From Cunnan
Jump to navigationJump to search
 
Line 5: Line 5:
  
 
== Synthetic Gems: ==
 
== Synthetic Gems: ==
Most inexpensive jewelry on the market uses sythetic rather than natural gemstones. These fall into two categories: ''Laboratory synthetics'' are exact duplicates of natural minerals. The only difference is that the stone lacks the inclusions and imperfections found in nature. ''Synthetic imitations'' are also grown in the lab, but are of a different chemical composition, than the natural stone. When using synthetics stones one should remember that most medieval jewels were cut as cabochons. A facetted gemstone would look out of place on a Viking warrior.
+
Most inexpensive jewelry on the market uses sythetic rather than natural gemstones. These fall into two categories: ''Laboratory synthetics'' are exact duplicates of natural minerals. The only difference is that the stone lacks the inclusions and imperfections found in nature. ''Synthetic imitations'' are also grown in the lab, but are of a different chemical composition than the natural stone. When using synthetics stones one should remember that most medieval jewels were cut as cabochons. A facetted gemstone would look out of place on a Viking warrior.
  
 
== Natural Imitations: ==
 
== Natural Imitations: ==
 
There are a number of natural gemstones that bear a strong resemblance to the cardinal stones—diamond, emerald, ruby, and sapphire. The following is a list of natural stones (plus a few manmade ones) which may prove to be effective substitutes:
 
There are a number of natural gemstones that bear a strong resemblance to the cardinal stones—diamond, emerald, ruby, and sapphire. The following is a list of natural stones (plus a few manmade ones) which may prove to be effective substitutes:
*diamond
+
*diamond—''rock crystal'' (a clear variety of quartz) is the classic substitute for diamonds. The best quality crystal came from central Europe, near the Rhine; hence the term ''rhinestone''. One should remember that diamonds were nearly aways cut in facets, almost never as cabochons. ''Herkimer diamonds'' (another variety of quartz) make convincing looking diamonds in the rough. Another good possibility is ''clear topaz'', but this may prove to be too expensive.
*emerald
+
*emerald (green beryl)—this is a difficult stone to imitate. Few other minerals exhibit such a vivid green color. ''Green aventurine'' is probably the best candidate for imitation emerald. Make sure to obtain high-grade aventurine if possible. ''Green zoisite'' (anyolite) is another possibility, but often has ruby inclusions. ''Green dioptase'' has the right color, but is too soft and brittle.
*ruby
+
*ruby (carbuncle)—''garnet'' is the best bet; it was one of the three stones classed as carbuncle. ''Spinel'' was a another type of carbuncle, but it has become rarer and more expensive than even genuine ruby. Synthetic spinel may be a good substitute however.
*ultramarine (ancient sapphire)
+
*ultramarine (ancient sapphire/lapis lazuli)
 
*hyacinth (late medieval & modern sapphire)
 
*hyacinth (late medieval & modern sapphire)

Revision as of 07:00, 22 August 2006

Imitation Gemstones, either natural or manmade, are effective substitutes for stones that are too expensive or too difficult to obtain. One of the problems facing re-enactors is how to present an authentic appearance on a limited budget. This is especially true regarding jewelry. Many gemstones that were popular in the Middle Ages are too expensive for the average person to obtain. There are several ways to use substitute or imitation jewelry however.

Glass Jewels:

The use of colored glass to imitate gemstones dates back to ancient times. For small jewels this can be very effective. For larger gemstones glass may be too clear, and lacks the inclusions found in natural stones.

Synthetic Gems:

Most inexpensive jewelry on the market uses sythetic rather than natural gemstones. These fall into two categories: Laboratory synthetics are exact duplicates of natural minerals. The only difference is that the stone lacks the inclusions and imperfections found in nature. Synthetic imitations are also grown in the lab, but are of a different chemical composition than the natural stone. When using synthetics stones one should remember that most medieval jewels were cut as cabochons. A facetted gemstone would look out of place on a Viking warrior.

Natural Imitations:

There are a number of natural gemstones that bear a strong resemblance to the cardinal stones—diamond, emerald, ruby, and sapphire. The following is a list of natural stones (plus a few manmade ones) which may prove to be effective substitutes:

  • diamond—rock crystal (a clear variety of quartz) is the classic substitute for diamonds. The best quality crystal came from central Europe, near the Rhine; hence the term rhinestone. One should remember that diamonds were nearly aways cut in facets, almost never as cabochons. Herkimer diamonds (another variety of quartz) make convincing looking diamonds in the rough. Another good possibility is clear topaz, but this may prove to be too expensive.
  • emerald (green beryl)—this is a difficult stone to imitate. Few other minerals exhibit such a vivid green color. Green aventurine is probably the best candidate for imitation emerald. Make sure to obtain high-grade aventurine if possible. Green zoisite (anyolite) is another possibility, but often has ruby inclusions. Green dioptase has the right color, but is too soft and brittle.
  • ruby (carbuncle)—garnet is the best bet; it was one of the three stones classed as carbuncle. Spinel was a another type of carbuncle, but it has become rarer and more expensive than even genuine ruby. Synthetic spinel may be a good substitute however.
  • ultramarine (ancient sapphire/lapis lazuli)
  • hyacinth (late medieval & modern sapphire)