Chainmaille: Difference between revisions

Latest revision as of 23:27, 10 October 2005

Redirect to:

@@ Line 1: / Line 1: @@
+#REDIRECT [[maille]]
-== Manufacture ==
-In [[Europe]], the 1-to-4 pattern was almost completely dominant, with 1-to-6 being seen very rarely. In [[East Asia]] (primarily [[Japan]]), chainmail was also common, but here several more patterns were utilized and an entire nomenclature developed around them. In the [[Middle East]], yet other patterns were developed and often combined with metal plates linked in with the rings.
-Historically, the rings composing a chainmail armour would be riveted or welded shut, to reduce the chance of the rings splitting open when subjected to a thrusting attack or a hit by an [[arrow]].
-In modern [[re-enactment]] and Live-action roleplaying games, split sprung steel washers are sometimes used. Usually a two pairs of pliers are used to bend the washers open and closed whilst "knitting" the chainmail. The resulting mail is usually heavier than traditional wire-wound mail.
-Members of the [[New Varangian Guard]] make their maille from spring steel rings. By using spring steel, you can use a finer gauge of wire and still retain strength. However, for truly tough and light maille, you cannot go past riveted maille.
-In the [[SCA]], you will find people whose skill at making historically accurate mail varies right across the spectrum; from amateur to true artisan.